No results were found for the filter!
16m2 SOLAR-RIPP ® according to the sketch SOLAR-RIPP ® "Built to Order" solar surface in HPRL design made to measure, suitable for a sloping house roof surface; The absorber size is 4m x 4m and has factory-made fixed 90 ° and 180 ° bends as well as two ends with threaded plugs...
For prices, please sign in.
SOLAR-RIPP ® according to the sketch SOLAR-RIPP ® according to the sketch. Individual custom-made products.
For prices, please sign in.
6m2 SOLAR-RIPP ® according to the sketch SOLAR-RIPP ® "Built to Order" solar surface in HPRL design made to measure, suitable for a vertical stainless steel surface in the size 1.1m high and 5.5m wide. The solar absorber surface has a factory-installed 180 ° connection bend...
For prices, please sign in.
16m2 SOLAR-RIPP ® according to the sketch SOLAR-RIPP ® "Built to Order" custom-made according to the sketch, suitable for a slightly inclined pitched concrete roof with maximum dimensions of 3.09m x 5.36m. The solar surface has a 90 ° connection bend firmly attached at the...
For prices, please sign in.
32m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP ® "Built to Order" custom-made according to the sketch for transverse installation, suitable for a slightly inclined shed roof. The size of the solar area is 4.8mx 6.8m (width x length) and has a factory-fitted 180 °...
For prices, please sign in.
27m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP ® "Built to Order" custom-made according to the sketch with two ridge transitions for 20 ° and special, extra close fitting angles / bends attached at the factory. Both solar surfaces are each 4.5 m wide and 3 m high...
For prices, please sign in.
SOLAR-RIPP ® custom-made Please submit full technical datas (pool size and volume, available width and length for SOLAR-RIPP ® solarpanel, vertical and horizonal distance between pool filter and the flatroof ...) incl. simple drawing and digital images of...
For prices, please sign in.
18m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP ® "Built to Order" custom-made according to the sketch in the size 3.68mx 4.99m. The solar surface has a firmly attached 180 ° connection bend at the factory. The two otherwise closed ends have a threaded plug for ventilation...
For prices, please sign in.
14m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP ® "Built to Order" Custom-made according to the sketch, suitable for two slightly inclined garden house pitched roofs of 1.8mx 4.1m. The solar surfaces have factory-fitted 90 ° connection bends that protrude into the roof...
For prices, please sign in.
8m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP ® "Built to Order" custom-made according to the sketch. The total height of 2,65m is not exceeded, the max. Length (width) is 3.25m and can be shortened as required. The solar surface has two 90 ° connection bends firmly...
For prices, please sign in.
34m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP® "Built to Order" custom-made according to sketch from 15.09.2019. The 3,75m width and max. 9m solar area has a 90 ° and 180 ° connection arc. The Clip distance is about 81cm.
For prices, please sign in.
14.5m2 SOLAR-RIPP ® according to sketch 2.3m x 6.3m in HPRL design with integrated return for minimal pressure loss two drainage and ventilation taps a factory-attached 115 ° bend, running vertically downwards including two transition pieces on 38mm hose 9 clip rows...
For prices, please sign in.
27m2 SOLAR-RIPP ® according to sketch 1.8m x 15.0m in HPRL design with integrated return for minimal pressure loss factory-fixed 180 ° bend including two transition pieces on 50mm PVC pipe material 43 clip rows distributor / collector right, left each made in one piece!
For prices, please sign in.
Manifold 12-way=41,0cm d=50mm SOLAR-RIPP ® !!!... Original SOLAR-RIPP ® manifold (header) in your desired configuration. Please tell us the nature (configuration) of the two pipe ends.
For prices, please sign in.
SOLAR-RIPP ® outlet with 1 1/2 external thread Threaded outlet with 1 1/2-inch external thread attached to the distributor / collector at the factory
For prices, please sign in.
SOLAR-RIPP ® according to the sketch SOLAR-RIPP ® "Built to Order" solar surface in Z-design made to measure according to the sketch, the absorber has 80 ribbed solar tubes in the assembled state, is 5m long. The lower distributor is delivered in one piece: cold water inlet...
For prices, please sign in.
9.5m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP® "Built to Order" custom-made according to sketch from 26.11.2022. The 1,9m width and max. 5m solar area has a 90 ° and 180 ° connection arc. The Clip distance is about 100cm.
For prices, please sign in.
15m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP ® "Built to Order" custom-made according to sketch. The 3m high and 5m wide solar surface has a 180° connection bend. The clip bar spacing is approx. 33cm. Both closed ends have an unscrewable threaded plug for venting, draining.
For prices, please sign in.
NEW
13.6m2 SOLAR-RIPP ® according to sketch SOLAR-RIPP ® "Built to Order" according to sketch. The 4m x 4m solar area has a 180° connection bend and a central corridor with a width of 60cm. The clip bar distance is approx. 1m. All four (4) closed ends feature a removable threaded...
For prices, please sign in.
Viewed