- L-ball (on request also as T-ball)
- Multi voltage system, Voltage 24-240 VAC/VDC (-0/ +5%) 50/60Hz
- Multiflange interface ISO 5211
- Two auxiliary limit switches
- Manual override
- Visual position indicator
- Light indicator operating
- Temperature of work: -20°C at +60°C
- Protection IEC 60529: IP-67
- Internal heater for eliminating of damage by condenation; 3,5 W
- Enclosure in polyamide (Duty rating (%) 75%)
- Fastening and main external shaft stainless steel
- Operation time /90° 50mm: 9s; 63mm 13s
- Operation time no load (s/90°) +-10%
- Electronique torque limiter 50mm: (Maximum operational torque 20Nm (177 lb/in); Maximum torque break 25 Nm (221 lb/in)
- Electronique torque limiter 63mm: (Maximum operational torque 55Nm; Maximum torque break 60 Nm
- Consumption at maximum torque 50mm: 24 VAC/VDC 1,3A 30,7W; 240VAC/VDC 0,2A 46W
- Consumption at maximum torque 63mm: 24 VAC/VDC 2,0A 47,5W; 240VAC/VDC 0,2A 46W.
Note when using our solar controller: When operating the motor valve and the additional pump in the solar circuit at the same time, please use a relay with two switching contacts for this operating mode (article number ELECTRICREL2)!
Installation and operating instructions are available for download electronically.